STTY

NAME

SYNOPSIS

DESCRIPTION

stty accepts the following non-option arguments that change aspects of the terminal line operation. A `[-]' before a capability means that it can be turned off by preceding it with a `-'. Some arguments are not available on all systems, since they use non-POSIX extensions. Such arguments are marked below with `(np)'.

Control settings:

[-]parenb

Generate parity bit in output and expect parity bit in input.

[-]parodd

Set odd parity (even with `-').

cs5 cs6 cs7 cs8

Set character size to 5, 6, 7, or 8 bits.

[-]hupcl [-]hup

Send a hangup signal when the last process closes the tty.

[-]cstopb

Use two stop bits per character (one with `-').

[-]cread

Allow input to be received.

[-]clocal

Disable modem control signals.

[-]crtscts (np)

Enable RTS/CTS handshaking.

Input settings:

[-]ignbrk

Ignore breaks.

[-]brkint

Breaks cause an interrupt signal.

[-]ignpar

Ignore parity errors.

[-]parmrk

Mark parity errors (with a 255-0-character sequence).

[-]inpck

Enable input parity checking.

[-]istrip

Clear high (8th) bit of input characters.

[-]inlcr

Translate newline to carriage return.

[-]igncr

Ignore carriage return.

[-]icrnl

Translate carriage return to newline.

[-]ixon

Enable XON/XOFF flow control.

[-]ixoff [-]tandem

Enable sending of stop character when the system input buffer is almost full, and start character when it becomes almost empty again.

[-]iuclc (np)

Translate uppercase characters to lowercase.

[-]ixany (np)

Allow any character to restart output (only the start character with `-').

[-]imaxbel (np)

Enable beeping and not flushing input buffer if a character arrives when the input buffer is full.

Output settings:

[-]opost

Postprocess output.

[-]olcuc (np)

Translate lowercase characters to uppercase.

[-]ocrnl (np)

Translate carriage return to newline.

[-]onlcr (np)

Translate newline to carriage return-newline.

[-]onocr (np)

Do not print carriage returns in the first column.

[-]onlret (np)

Newline performs a carriage return.

[-]ofill (np)

Use fill (padding) characters instead of timing for delays.

[-]ofdel (np)

Use delete characters for fill instead of null characters.

nl1 nl0 (np)

Newline delay style.

cr3 cr2 cr1 cr0 (np)

Carriage return delay style.

tab3 tab2 tab1 tab0 (np)

Horizontal tab delay style.

bs1 bs0 (np)

Backspace delay style.

vt1 vt0 (np)

Vertical tab delay style.

ff1 ff0 (np)

Form feed delay style.

Local settings:

[-]isig

Enable interrupt, quit, and suspend special characters.

[-]icanon

Enable erase, kill, werase, and rprnt special characters.

[-]iexten

Enable non-POSIX special characters.

[-]echo

Echo input characters.

[-]echoe, [-]crterase

Echo erase characters as backspace-space-backspace.

[-]echok

Echo a newline after a kill character.

[-]echonl

Echo newline even if not echoing other characters.

[-]noflsh

Disable flushing after interrupt and quit special characters.

[-]xcase (np)

Enable input and output of uppercase characters by preceding their lowercase equivalents with `\', when icanon is set.

[-]tostop (np)

Stop background jobs that try to write to the terminal.

[-]echoprt [-]prterase (np)

Echo erased characters backward, between `\' and '/'.

[-]echoctl [-]ctlecho (np)

Echo control characters in hat notation (`^c') instead of literally.

[-]echoke [-]crtkill (np)

Echo the kill special character by erasing each character on the line as indicated by the echoprt and echoe settings, instead of by the echoctl and echok settings.

Combination settings:

[-]evenp [-]parity

Same as parenb -parodd cs7. With `-', same as -parenb cs8.

[-]oddp

Same as parenb parodd cs7. With `-', same as -parenb cs8.

[-]nl

Same as -icrnl -onlcr. With `-', same as icrnl -inlcr -igncr onlcr -ocrnl -onlret.

ek

Reset the erase and kill special characters to their default values.

sane

Same as cread -ignbrk brkint -inlcr -igncr icrnl -ixoff -iuclc -ixany imaxbel opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke, and also sets all special characters to their default values.

[-]cooked

Same as brkint ignpar istrip icrnl ixon opost isig icanon, plus sets the eof and eol characters to their default values if they are the same as the min and time characters. With `-', same as raw.

[-]raw

Same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -opost -isig -icanon -xcase min 1 time 0. With `-', same as cooked.

[-]cbreak

Same as -icanon.

[-]pass8

Same as -parenb -istrip cs8. With `-', same as parenb istrip cs7.

[-]litout

Same as -parenb -istrip -opost cs8. With `-', same as parenb istrip opost cs7.

[-]decctlq (np)

Same as -ixany.

[-]tabs (np)

Same as tab0. With `-', same as tab3.

[-]lcase [-]LCASE (np)

Same as xcase iuclc olcuc.

crt

Same as echoe echoctl echoke.

dec

Same as echoe echoctl echoke -ixany, and also sets the interrupt special character to Ctrl-C, erase to Del, and kill to Ctrl-U.

Special characters:

The special characters' default values vary from system to system. They are set with the syntax `name value', where the names are listed below and the value can be given either literally, in hat notation (`^c'), or as an integer which may start with `0x' to indicate hexadecimal, `0' to indicate octal, or any other digit to indicate decimal. Giving a value of `^-' or `undef' disables that special character.

intr

Send an interrupt signal.

quit

Send a quit signal.

erase

Erase the last character typed.

kill

Erase the current line.

eof

Send an end of file (terminate the input).

eol

End the line.

eol2 (np)

Alternate character to end the line.

swtch (np)

Switch to a different shell layer.

start

Restart the output after stopping it.

stop

Stop the output.

susp

Send a terminal stop signal.

dsusp (np)

Send a terminal stop signal after flushing the input.

rprnt (np)

Redraw the current line.

werase (np)

Erase the last word typed.

lnext (np)

Enter the next character typed literally, even if it is a special character.

Special settings:

min N

Set the minimum number of characters that will satisfy a read until the time value has expired, when -icanon is set.

time N

Set the number of tenths of a second before reads time out if the min number of characters have not been read, when -icanon is set.

ispeed N

Set the input speed to N.

ospeed N

Set the output speed to N.

rows N (np)

Tell the kernel that the terminal has N rows.

cols N columns N (np)

Tell the kernel that the terminal has N columns.

size (np)

Print the number of rows and columns that the kernel thinks the terminal has. (Systems that don't support rows and cols in the kernel typically use the environment variables LINES and COLUMNS instead; however, GNU stty does not know anything about them.)

line N (np)

Use line discipline N.

speed

Print the terminal speed.

N

Set the input and output speeds to N. N can be one of: 0 50 75 110 134 134.5 150 200 300 600 1200 1800 2400 4800 9600 19200 38400 exta extb. exta is the same as 19200; extb is the same as 38400. 0 hangs up the line if -clocal is set.

OPTIONS

-a, --all

Print all current settings in human-readable form.

-g, --save

Print all current settings in a form that can be used as an argument to another stty command to restore the current settings.

The long-named options can be introduced with `+' as well as `--', for compatibility with previous releases. Eventually support for `+' will be removed, because it is incompatible with the POSIX.2 standard.

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS